Slixx NASCAR 1312 99 Exide Jeff Burton Roush Ford T-Bird Waterslide Decals 1/24

Description

This is an NOS / New Old Stock
1/24
Slixx
scale waterslide decal set featuring the #99 Exide Batteries sponsored Roush Racing Ford Taurus NASCAR stock car driven by Jeff Burton PN: 1312. This is for the DECALS ONLY. Always stored in a clean, dry, smoke free place. No damage. All sales are final. Don't miss out on this one!!!! Comes as is and as seen above. Will ship worldwide. Shipping combined on multiple items
.
Shipping size is 9 in x 7 in x 1 in and weighs 8 oz.
NOTE: these are old decals (mid 2000s and earlier), meaning they were not recently printed. Some older decals will have the tendency to crack if the proper precautions are not taken. We are not responsible for the method’s you use and the end result. We are not and can’t tell you exactly how to build your models or apply your decals, as each case is different. But some tips we’ve gathered over the years that may or may not work depending your specific situation. Please have the knowledge and proven capability/processes that work for you to successfully allow older decals to apply correctly to your model. Below are ONLY suggestions collected from various forums and groups.
-
Microscale Liquid Decal Flim or some similar decal fixiative.
-
HOT water, that is maintained hot and does not cool (ie. With a coffee warmer, etc.).
-
A drop of soap/dishwasher fluid.
-
Low humidity in your model workshop.
-
2-4 light coats of model specific, well mixed clear coat or decal bonder film prior to application onto the model. Plenty of drying time (not same day application). Close trim of decal prior to application.
-
NOTE: Most Slixx fluorescent colors have been known to crack.