DC12V VU Meter Driver Board Audio Power Amplifier Level Meter Drive Module Board

Description

Home
Payment
Shipping
Return Policy
About Us
Contact Us
Feedback
Store Categories
Other
Capacitance/resistance
Processor and microcontroller
Diode/transistor
Switch/circuit protection/powe
Interface chip/clock timing
Optoelectronic devices
Crystal/oscillator/resonator
Filter/Amplifier/RF
Connector
Memory/sensor
Inductor/coil/transformer
Display module/LED driver
Data conversion chip/logic dev
Tools/Accessories/Wire
Audio device/micro motor
IOT/Functional Module
Development Board
Business&Industrial
motor
1. Install the input low-pass filter circuit to filter out high-frequency interference, which is suitable for harsh power environment (such as car audio system).
2. The output sensitivity is adjustable and suitable for various measuring heads.
3. The most commonly used 12VDC power supply is convenient for on-board machines and PCs.
4. The power supply has reverse polarity protection function.
5. It has power pointer protection to avoid starting pointer primers and prolong the service life of the first meter.
6. Metal film resistance is 0.5W, with high power margin to ensure long-term continuous, reliable and stable operation.
7. Using the audio level, the integrated circuit chip for testing the import is designed, which contains the square root circuit of dynamic exponential compression (for example, input 1V, output 1V; input 4V, output 2V; input 9V, output 3V). The instruction is dynamic and accurate, and the pointer swings moderately, avoiding the shortcomings of small signal pointer immobility and large signal pointer rendering.
8. Without separate power supply, power can be directly extracted from the original power supply. Compared with ta7318p / ta7332p, it reduces the cost of transformer, occupies half of the chassis space and is more convenient and flexible to install.
Main parameters:
Input sensitivity: input 400Hz audio signal, measure with fluke 8025b digital multimeter AC MV file, input: 97mv, 39 level meter pointer + 3 dB position.
Power supply voltage: DC 12V 0.12A.
Backlight power supply terminal: dc10-12v 50mA. Used for backlight power supply of small bulbs.
Sensitivity of driving Vu meter and level meter: the recommended sensitivity is 500uA and the internal resistance is 630 ohm. At this time, the damping effect is the best. The damping effect of instruments of other specifications will be different and need to be further adjusted.
Note: the power supply voltage must be strictly guaranteed to be 12VDC. Although exceeding 12VDC can work for a short time, it will burn out the protection circuit for a long time. Wiring must be carried out. The live operation damage caused by this man-made fault is not within the scope of warranty.
instructions:
1. Input part:
Lin, 0, Rin, is the audio signal input terminal, which is applicable to the left, ground and right channels of CD audio output. Or it is connected to the front level input terminal selection output terminal, and should not be connected to the front level output terminal or volume potentiometer output terminal.
2. Output part:
The two +, - terminals on the side of Vu meter are outputs, which shall be connected to the +, - terminals of the two level meters respectively.
Recommended sensitivity of driven liquid level gauge: DC 100 ~ 500 shall not exceed 1mA.
On board 2 blue 3296 Series 500 ohm potentiometers can adjust the sensitivity of the two titles respectively. Rotate clockwise to increase the sensitivity.
La and LB are backlight power supply terminals, and RA and Rb are another group of backlight power supply terminals.
package list:
Vu drive board x1
Payment Method
Shipping Policy
Returns & Refund Policy
Feedback
About us
Payment Method
EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping Policy
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Returns & Refund Policy
All package need to
wait 30 days
(US only need 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
About us
We are professional Business & Industrial DIY Module part store. Follow and save our store,We will provide the best service and high quality-low price items for you.Save more
On Dec 3, 2022 at 22:16:02 PST, seller added the following information: