(4) NIPON 72000UF 75V Electrolytic capacitors,audio amplifier,SE,KIT,KRELL,PASS

Description

On sale!
9 cases of 25 per case available!
see my other listing, for better price on buying by the case.
72,000UF 75V Electrolytic capacitors.
95C temperature rating, great for use in hot operating equipment, such as class A amplifiers.
Excellent substitute for replacement in older power amplifiers.
A huge difference, improvement, replacing the old degraded capacitors, with fresh new ones!
As capacitors age, past 10 years of life, the capacitance decreases, affecting your amplifier's sound and performance.
The difference is shocking, and you've wished you had replaced them a long time ago! A must investment, for bringing back the great sound of your favorite amplifier!
Some known makes and models, will work great, with these capacitors...
Krell:
KSA-50, 100, 80, 80B, 150, 200, 200B, 250,
KMA-100, 200, 160, 160B,
MDA-300, 500,
Pass Labs:
X350, X350.5, X600, X600.5,
XA160, XA160.5, XA200, XA200.5,
(For Pass Labs) check height of the stock capacitors. these capacitors must not be is not be greater height, in most cases, than the stock capacitors.
Threshold:
SA-1, SA-2, SA-3, S/150, S/200, S/300,
S/500, (if voltages on power supply is not greater than +/-75 volts)
For Threshold amplifiers:
please note, the capacitance of these capacitors, are about double, than the stock capacitors, for the Threshold amplifiers, so AC in-rush current suppressor (5 ohm thermistor) or a AC soft start board (ebay, from China), would be needed to install in line with the AC primary circuit of the amplifier.
The result with more capacitance, is improved dynamics, tighter faster bass, and finer sound details.
New, never used.
Great for DIY amplifiers, high current power supplies, replacement use for many older Hi-End amps, such as Pass, Threshold, Krell, and others.
Or make an external capacitor bank for adding more filtering to your amps, for more dynamic audio output, tighter and more controlled bass, and higher S/N ratio.
If your amplifier is over 10 years old, it's time to replace the power supply caps with new ones. It does make a difference, and you'll hear the sound improvement immediately after the caps are replaced.
Tighter bass, improved dynamics, quieter background, hear more fine details, and bring back the smooth midrange and clean highs, that all has slowly gone away from the old capacitors weakening from many hours of use, due to age, and heat from the heatsinks.
All capacitors are tested at the rated voltage, and pass the leakage current specifications.
Size: 3" Diameter X 4.6" High
Terminal screw size: #10/32
10/32 HARDWARE NOT INCLUDED
You will receive New, tested capacitors.
There's no returns on this item, and sale is final.
Guaranteed to operate and function properly.
If you have any problem with any capacitor, just return the capacitor for a replacement.
Local pickup in West Milford, NJ 07480, is also welcome.
(Not in Wayne, Wayne is where I ship from)