1/24 NASCAR 15 AC Delco Ken Schrader Chevy Chevrolet Lumina Waterslide Decals

Description

This is a NOS / New Old Stock
unknown manufacturer 1/24 or 1/25 scale waterslide decal set for the 15 AC Delco Sponsored Chevy Chevrolet Lumina NASCAR Stock Car plastic model as driven by Ken Schrader. Some yellowing, see the pic. This is for the DECALS ONLY. Always stored in a clean, dry, smoke free place. No damage. All sales are final. Don't miss out on this one!!!! Comes as is and as seen above. Will ship worldwide. Shipping combined on multiple items
.
Shipping size is 9 in x 7 in x 1 in and weighs 10 oz.
NOTE: these are old decals (mid 2000s and earlier), meaning they were not recently printed. Some older decals will have the tendency to crack if the proper precautions are not taken. We are not responsible for the method’s you use and the end result. We are not and can’t tell you exactly how to build your models or apply your decals, as each case is different. But some tips we’ve gathered over the years that may or may not work depending your specific situation. Please have the knowledge and proven capability/processes that work for you to successfully allow older decals to apply correctly to your model. Below are ONLY suggestions collected from various forums and groups.
-
Microscale Liquid Decal Flim or some similar decal fixiative.
-
HOT water, that is maintained hot and does not cool (ie. With a coffee warmer, etc.).
-
A drop of soap/dishwasher fluid.
-
Low humidity in your model workshop.
-
2-4 light coats of model specific, well mixed clear coat or decal bonder film prior to application onto the model. Plenty of drying time (not same day application). Close trim of decal prior to application.
-
NOTE: Most Slixx fluorescent colors have been known to crack.